Low Power Broadcasting FAQ (Frequently Asked Questions) --- From: raredata@geocities.com (R. Harrison) Newsgroups: alt.radio.pirate,alt.answers,news.answers Subject: Low Power Broadcasting FAQ (Frequently Asked Questions) Supersedes: Followup-To: poster Date: 23 Jun 1998 12:08:48 GMT Organization: none Expires: 21 Jul 1998 11:49:30 GMT Message-ID: X-Last-Updated: 1997/12/31 Archive-name: radio/broadcasting/low-power-faq Posting-frequency: biweekly Last-modified: 1997.12.31 Low Power Broadcasting FAQ (Frequently Asked Questions) copyright 1994-1997 by Rick Harrison NOTICE: It is not the author's intention to advocate unlawful activity. If the broadcasting regulations in your country are too restrictive for your liking, you should try to get them changed or move to a less repressive environment. If you choose to disobey the regulations, you must be willing to face the consequences. The web version of this document contains more information, is updated more often, and is illustrated with graphics and tables. Its URL is http://www.geocities.com/Athens/5383/lowpower.html ------------------------------- What is low power broadcasting? ------------------------------- Some individuals and small groups operate low power radio or TV stations as a hobby, or as a way of spreading some commercial, religious or political message. Some volunteer groups operate unlicensed stations with a "public access" format, allowing virtually anyone to get on the air for an hour or two each week and broadcast any sort of material that they feel passionate about. Unlicensed stations are known by such terms as "free radio" and "micropower broadcasting." Some of them operate within the legal guidelines for unlicensed stations, while others use a bit more power than the rules allow. -------------------------------- Is low power broadcasting legal? -------------------------------- This depends on what country you are in. The situation varies from place to place, so you should check with a lawyer or with the agency that regulates broadcasting in your part of the world before turning on any transmitter. Don't rely entirely on web pages or usenet newsgroups for such critical information. In some European countries (e.g. the Netherlands), you can be arrested for merely possessing an unlicensed transmitter. In Ireland, unlicensed broadcasting is unlawful but stations that don't cause interference are seldom prosecuted. In Taiwan, the authorities have recently threatened to imprison unlicensed broadcasters. Indonesia generally tolerates unlicensed broadcasts on shortwave. Canada and Japan have made it possible for people to get licenses for very low power FM stations if the licensees promise to provide programming that is not available from mainstream outlets. In the United States, Title 47 of the Code of Federal Regulations (Part 15, subpart C) indicates that unlicensed broadcasting is limited to microscopic power levels. The power limit for unlicensed FM transmissions is a signal strength of 250 microvolts per meter, measured 3 meters from the transmitting antenna. At this power level, stereo reception with a good signal to noise ratio is only possible within a 100 foot radius, and an average car radio can barely detect the signal at a distance of 100 meters. On the AM band, the limit is 0.1 watt and an antenna system no more than 3 meters long; this provides a range of 2 or 3 city blocks for cheap receivers, farther for high-quality radios. Some have argued that the strictness of these regulations violates the US Constitution (footnote 1) and the UN Declaration of Human Rights.(footnote 2) Others have said that the federal government does not (or should not) have jurisdiction over low-power transmissions that do not cross state lines. There have been many court battles over the FCC's regulations, and no doubt there will be many more. Apart from the Part 15 rules mentioned above, legal unlicensed options include carrier current transmission (using the power lines as an antenna system); cable FM broadcasting (working in conjunction with your local cable TV system); and burying special "leaky" coaxial cable to use as an AM transmitting antenna on privately owned land. Panaxis and LPB can provide more information about legal options. * footnotes 1. From the Bill of Rights: "Congress shall make no law respecting an establishment of religion, or prohibiting the free exercise thereof; or abridging the freedom of speech, or of the press..." 2. Article 19: "Everyone has the right to freedom of opinion and expression; this right includes freedom to hold opinions without interference and to seek, receive and impart information and ideas through any media and regardless of frontiers." -------------------------------------------- What equipment do I need to start a station? -------------------------------------------- For a radio station, you will need audio sources (tape players, CD players, microphones, etc.), an audio mixer, a transmitter, a coaxial cable (usually RG-8 or RG-58/U) to carry the signal from your transmitter to your antenna, and an antenna. A piece of equipment called a compressor/limiter is also very important. It reduces the level of sudden loud sounds so that they don't over-drive the transmitter, and brings up the volume of quiet sounds so that people riding in cars and listening in other noisy environments can hear them. Radio stations that operate without a compressor/limiter sound very amateurish and run a higher risk of interfering with stations on nearby frequencies. For television, you also will need video sources (cameras, videotape players, character generators, etc.) and a video switcher. ------------------------------------------------------ How much power should I use to get a range of X miles? ------------------------------------------------------ This is the most frequent question, and many newbies want a simple answer. There is no simple answer. The distance at which your signal can be heard will vary from listener to listener, depending on their equipment and location. In fact, many elements affect your range: * the transmitter power * the transmit antenna's height and effectiveness * local terrain (hills, large buildings, etc.) * interference from distant stations on the same channel * splatter from local stations on adjacent channels * the height and effectiveness of the listener's antenna * the sensitivity of the listener's receiver * amount of "static" at the listener's location predicting the range of an FM or TV signal On FM and TV broadcast frequencies, antenna height puts an upper limit on your range, regardless of power levels. (It is true that diffraction can extend your range slightly, and signals sometimes travel greater distances when atmospheric conditions are just right, but we will ignore these factors for the time being.) The distance from your antenna to the radio horizon is determined by this formula: distance in miles = 1.415 times the square root of the antenna height in feet. Now you see why FM and TV stations go to the expense of building antenna towers that are hundreds of feet high, or locate their antennas on mountain-sides that overlook the cities they want to serve. Of course, the formula assumes that the terrain is relatively flat. If the transmitting antenna is located at the top of a hill, its range might be better, but this depends on the direction in which the antenna radiates its energy (i.e. its vertical radiation angle). If the antenna shoots a lot of energy up into the sky (as some types of antennas tend to do), placing it in a higher location will not help much. You can see the effect of terrain on coverage by following this link to some low-power FM coverage maps ( http://www.bcradio.net/fmsrmap.htm ). [The web version of this FAQ contains more information on this topic.] ------------------------------ Where can I get a transmitter? ------------------------------ Below is a brief list of companies selling low power transmitters and transmitter kits. Note to newbies: To assemble these kits, you must be able to solder components onto a circuit board, and it helps if you know the difference between a resistor and a capacitor. If you haven't reached this stage of electronic know-how yet, consider buying some of the educational kits available from C & S Sales, 1245 Rosewood, Deerfield IL 60015, telephone 800-292-7711. Their electronic components course (item #ECK-10) might be especially helpful to newbies. Several web pages that will teach you how to solder are available: http://www.epemag.wimborne.co.uk/solderfaq.htm http://surf.pangea.ca/~rmiller/solder.html http://www-sgc.colorado.edu/itll/uvsoder.html * sources of transmitters: ABC FM web page: http://indigo.ie/~alinton/rigindex.htm e-mail: ndls@bigfoot.com This company sells low power FM exciters, stereo coders, and RF amps. Apparently located in Ireland. --- DC Electronics P O Box 3203 Scottsdale AZ 85271 phone 800-423-0070 The Stereocaster is an FM stereo transmitter kit based on the BA1404 chip with a few milliwatts of output power ($29.95 plus $4 S & H). It has a smooth fine-tuning control which makes it easy to get on the exact frequency you want, and a voltage regulator which improves stability. It has been reported that the signal strength can be increased by replacing the supplied output transistor with an MRF581. The Stereocaster is more stable than Ramsey's famous FM-10. New items: a stereo transmitter kit with PLL tuning, and some FM antenna kits. --- DSchmidt Technologies 191 Madera Ave Ventura, CA 93003 fax 805-676-1092 web page: http://www.silcom.com/~dschmidt Offers a digital frequency readout for FM transmitters, and two low power Panaxis transmitters, plus assorted parts and gadgets. The DTMF-activated relay could be used for remote control of transmitters in various locations by sending tones to them via telephone lines or radio links. --- L.D. Brewer 10740 N. 56th St., Suite 186 Tampa FL 33617 phone 1-800-886-8023 or 1-813-960-8023 web page: www.ldbrewer.com The L D Brewer company sells FM transmitter kits, antennas and supplies from a variety of companies, and will assemble and repair kits. --- LPB Inc. 28 Bacton Hill Road Frazer PA 19355 phone 610-644-1123 fax 610-644-8651 web page: members.aol.com/lpbinc/ Since 1960, LPB Inc. has been a source of legal low power broadcast equipment, including carrier-current transmitters, radiating coaxial cable equipment, and other such gear. They ask their customers a lot of questions and clearly want to avoid selling equipment to rule-breakers. --- North Country Radio PO Box 53 Wykagyl Station New Rochelle, NY 10804-0053 phone 914-235-6611 fax 914-576-6051 web page: www.northcountryradio.com Items offered include a low power FM transmitter that (thankfully) does not use the BA1404 chip, and some TV transmitters for use by licensed amateur radio operators. New item: an AM transmitter kit. --- Panaxis Productions P O Box 130 Paradise CA 95967-0130 (send $2 for catalog) web site: www.panaxis.com This company provides many interesting books and kits. They offer a half-watt mono FM transmitter with excellent technical specs, which can be combined with their stereo generator to build a high-quality low power station (more than $200 for the two kits). They also have some AM gear. Panaxis kits might not be suitable for absolute beginners; you should have some experience in circuit assembly before you tackle these. --- Progressive Concepts P.O. Box 586 Streamwood, IL 60107 phone 630-736-9822 fax 630-736-0353 web page: http://home1.gte.net/dgagl/progressive/ FM transmitters, antennas, low-pass filters, microphones and audio mixers, SWR meters, studio to transmitter links, etc. --- Ramsey Electronics 793 Canning Pkwy Victor NY 14564 phone 716-924-4560 web site: http://www.ramseyelectronics.com Ramsey kits have well-written instruction manuals, and most of the circuit boards have lots of wide-open space which makes modifications easy. The company also has a good reputation for service. On the negative side, they only offer plastic cases for their broadcasting kits (transmitter circuits generally perform better in metal enclosures). The FM-10A is an FM stereo transmitter kit ($34.95 plus shipping) with a few milliwatts of output power; it is based on the BA1404 integrated circuit. Several people have posted messages in alt.radio.pirate indicating that the FM-10A has a problem with frequency drift and must be adjusted frequently; others have said they do not have this problem. The FM-25 kit, which has PLL tuning for greater stability, costs about $130. Ramsey also offers a low-budget AM transmitter and a more expensive AM transmitter that has PLL frequency control. The cheaper AM-1 kit is not very good, in my opinion; it tends to drift and the audio quality is poor. --- R. Scott Communications 6972 Larkspur Road Sooke, B.C. Canada, VOS-1NO phone 250-642-2859 fax 250-642-7742 e-mail: kscott@pinc.com web page: http://www.sasquatch.com/~zane/catalog.txt A source of fully assembled FM transmitters with PLL frequency control that (according to their catalog) meet FCC and Canadian government standards, from 20 millwatts to 110 watts. Antennas too. Tech support by phone; one year parts and labor guarantee. --- Veronica FM 18 Victoria Street Bradford West Yorkshire BD13 1AR United Kingdom phone 01274 816200 web site: http://www.legend.co.uk/~veronica/ Antennas, audio processors, and FM transmitters (kits and assembled). People who've experimented with several brands have reported on the 'net that Veronica equipment is very well designed. ---------------------------- How do I select a frequency? ---------------------------- Most receivers with digital tuning will only lock onto signals that are on standard broadcast frequencies. In the US, AM stations are at 10 kHz intervals, ranging from 540, 550, 560 ... to 1700, and FM stations are spaced at 0.2 MHz intervals, ranging from 88.1, 88.3 ... to 107.9 MHz. (In Europe, AM stations are spaced at 9 kHz intervals.) Do not use an out-of-band frequency; they are reserved for other services. (For example, the frequencies just below 88 MHz are used for TV broadcasts, and the frequencies just above 108 MHz are used for aircraft navigation and communications.) Make a survey of the band you are planning to use. Get some graph paper or notebook paper and make a list of all the channels. Listen during the day and at night, making a note of what station(s) you can hear on each channel. Use a good receiver with digital tuning and a decent antenna, not some cheap piece of junk clock-radio or dime-store pocket radio. Repeat this band-scanning process several times during the course of a couple of weeks. (If you really want to be thorough, get a list of all the licensed stations in a 100-mile radius. You can get this data from trade publications, or on the web from the Station Location Page: http://www5.jagunet.com/~kodis/station.html ) Now, sit down with your data and search for an appropriate channel. An appropriate channel for low power broadcasting is one that is not occupied by a local station, or by an often-audible distant station. The "first adjacent" channels -- the next channel above and the next channel below the one you're considering -- also must not be occupied by local stations, because they will "splatter" onto your signal, and your signal will splatter onto theirs. (An explanation of splatter is coming up later in this document.) If there is a TV station broadcasting on channel 6 in your area, it is unwise to operate on 88.1 or 88.3 MHz. TV receivers have broadband tuning circuits (a TV channel is 6 MHz wide, enough spectrum to hold 30 FM stations), so broadcasts at the low edge of the FM band can easily interfere with reception of channel 6. ---------------------------------- What kind of antenna should I use? ---------------------------------- The antenna is the most important part of a broadcast station; it has more effect on signal strength and station safety than any other component. Remember that YOUR ANTENNA CAN KILL YOU. Don't put up an antenna in a place where it could fall onto a power line, or a place where a power line could fall onto the antenna. Make sure your antenna mast is properly grounded so that if lightning strikes, the lightning will be conducted into the ground instead of into you. Falling off of roofs and ladders can result in injury. Factory-made antennas are available for the FM band; the 5/8-wave vertical antenna made by Comet has gotten good reviews on the 'net. If you need to build an antenna, the J-pole and the half-wave dipole are good choices, and lots of FM antenna plans are available on the world-wide web. If you are broadcasting on AM or shortwave, you will probably end up building your own antenna system. If so, you would be well advised to get a copy of The ARRL Antenna Book, which is published by the Amateur Radio Relay League and available from ham radio supply dealers and Amazon (www.amazon.com). * quick and dirty antennas The following types of antennas can be built quickly and cheaply, and will serve to get you on the air when you first start out. As you learn more, you will want to upgrade to better antennas. shortwave For shortwave broadcasting, a horizontal dipole works well enough. Cut two pieces of un-insulated copper wire; the length of each piece will be 234 feet divided by your frequency in MHz. Example: for 6950 kHz, each element will be (234/6.950=) 33.7 feet long, and you will need two trees or other support structures about 67 feet apart. Solder one element to the center conductor of your coaxial feedline, and solder the other element to the outer conductor (shield) of the co-ax. (Note: the solder joints cannot bear the weight of the cable; loop the cable once over an insulator and provide some "strain relief".) Make a little loop at the free end of one element, and tie a long piece of string to that loop. Tie a small, heavy object (such as a lead fishing weight) to the other end of the string. Throw the weight or use a slingshot to launch it up into the branches of a tree so that it goes over a branch and comes back down to earth; then hoist up that half of your antenna. (Suggestion: don't hit yourself in the head with the weight.) Repeat the process for the other element. AM In AM broadcasting, a vertical section of TV antenna mast, 10 or 20 feet tall, provides a quick antenna. The center conductor of the coaxial cable from your transmitter is connected to the bottom of this vertical mast; the base of the mast sits on an insulator which sits on the ground. If the vertical radiator is made of several sections of antenna mast, make sure the sections are electrically connected -- try screwing some self-tapping sheet metal screws into the joints. Obviously the mast will not stand up by itself; use nylon rope or other non-metallic materials to support it. The outer conductor (shield) of the coaxial cable is connected to a set of "ground radials," which are pieces of copper wire radiating out from the base of the antenna like spokes from the hub of a wheel. (The radials are not connected to the vertical radiator.) The radials can be buried a few inches below the surface for a permanent installation. "Beware the lawnmower." This antenna is only a tiny fraction a wavelength high, therefore it will not be a very efficient radiator. There are ways to improve the efficiency slightly (loading coils, capacitance hats, etc.) -- study the ARRL Antenna Book and visit the Medium Wave Alliance web site ( http://www.geocities.com/ResearchTriangle/Lab/1635/equip.html ) for more information. [For those who use 1 watt or less, the web version of this FAQ contains a section called "getting every milliwatt to radiate."] ----------------------------------------------- How can I avoid interfering with other signals? ----------------------------------------------- No transmitter puts out a pure signal. In addition to the main signal, there will be harmonics and spurs. These impurities really can interfere with other signals. So please, do yourself and your colleagues a favor and make your signal as clean as possible! Harmonics are found at multiples of the main frequency. For example, an FM transmitter tuned to 100.1 MHz will also be emitting weaker signals at 200.2 MHz, 300.3 MHz, and so forth. Spurs (called "sprogs" in Britain) occur at unpredictable frequencies. For example, if your transmitter has PLL tuning and uses a 4 MHz crystal reference oscillator in the circuit, there might be some mixing of signals in the circuit and you might find a spur at 4 MHz above and/or below your main frequency. Spurs are especially dangerous because it is hard to predict what frequency they will be on or how powerful they will be. The only way to "see" them is with an expensive piece of test equipment called a spectrum analyzer. (In major cities, you may be able to rent a spectrum analyzer, but it might be better to spend the money on a filter; see below. You can see spectrum analyzer displays of some low power FM transmitters' spurs and harmonics on the DSchmidt Technologies web pages.) There is no way to completely eliminate spurs and harmonics; they are a fact of life in radio-frequency circuits. Broadcasters have an obligation to reduce the intensity of these "spectral impurities" so that they do not have any effect on the rest of the world. One step you can take is to install an external lowpass filter or bandpass filter between your transmitter and antenna. If you're transmitting with more than half a watt of power, you should do this. A lowpass filter allows signals below a certain frequency to pass through, but frequencies above that cutoff point are reduced in intensity; the amount of reduction increases as the frequency gets farther from the cutoff point. A bandpass filter reduces the intensity of signals above and below its frequency range. Splatter is another form of interference. When you try to tune in a station and you hear some hissing and harsh sputtery noises from another station on a near-by frequency, that's splatter. Splatter has a variety of causes including excessively high level of audio fed to the transmitter (over-modulation) and poor choice of operating frequency. Splatter is also more of a problem in areas close to one of the transmitters, where that rig's signal is much stronger than the one being splattered on (the splatter-ee). This is why it's not a good idea to operate a pirate station with more than 1 or 2 watts of power in the middle of a densely populated neighborhood. Many of the complaints that caused the authorities to attack free radio stations in 1997 were inspired by splatter onto second adjacent channels. For example, an unlicensed station on 99.1 in Tampa, Florida splattered onto a licensed station on 99.5 MHz. Several people in the neighborhood of the unlicensed station's transmitter complained when they were unable to hear coverage of a football game on 99.5 one weekend. [The web version of this FAQ also discusses images, co-channel interference, and RF feedback in audio gear.] -------------------------------------- How can I take phone calls on the air? -------------------------------------- The question of getting phone audio on the air was raised in alt.radio.pirate in September, 1997. The following suggestions were given: DJ Bryce wrote: "Your best bet is the Radio Shack speaker-phone box. Its easy to use, simple to install and is a good cheap interface. Just tap off the speaker leads... and if you want to, pick up their 1:1 transformer for a buck or two, and that will clean up any hum or buzz. It works for many a commercial station that can't afford a Gentner or Telos." Bungalow Bill wrote: "My scanner will scan the 49 MHz range, where cordless phones operate. It has a headphone jack in the back of it, so I bought a simple patch cable that just takes 1/8 inch to 1/4 inch. Then I plug in the cordless phone, and tune the scanner to its frequency. When someone calls in, just up the volume on the mixer, and they're on! Simple, and elegant." --------------------------------- How can I avoid getting `busted'? --------------------------------- The easiest way to avoid a clash with the authorities is to stay under the power limit for unlicensed broadcasts. If you exceed that limit for some reason, you will probably get busted sooner or later, unless you lose interest and quit broadcasting first. * the hunter's tools When the authorities get around to sending one of their direction- finding (DF) vehicles into your area, it's easy for them to find your transmitter. Disguising your antenna or telling lies about your location on the air will not help you. Modern DF equipment quickly and efficiently leads the authorities directly to the source of your signal. Many broadcast engineers, ham radio operators, and avid radio listeners are also equipped with DF gear or have figured out ways to find transmitters by using receivers that have fairly directional antennas on them. For less than $400, you too can buy your very own DF equipment. ( http://www.agrelo.com/dfjr.html ) * guerilla tactics Many people in the new microbroadcasting movement in the US frown on guerilla broadcasting tactics. They advocate broadcasting 24 hours a day with relatively high power levels from publicized locations, as a form of civil disobedience and a way to give legitimacy to the movement. They hope that a growing number of stations operating in this manner will inspire public support for microbroadcasting and will pressure the government into changing the regulations. So far, the government has responded to this "pressure" by forcibly confiscating transmitters from several of the more defiant stations. I think the microbroadcasting movement has over-estimated the amount of pressure a small group of people can put on a large government. Broadcasters who want to remain on the air rather than becoming martyrs for the movement might be well-advised to consider some guerilla tactics. Some "pirates" in Europe have used the following approach to avoiding the authorities: they put a battery pack, a transmitter, and a taped program on a roof-top or hill-top and leave it unattended during the broadcast. If the authorities find the transmitter, they cannot jail or fine the broadcaster -- unless they catch him when he comes back to retrieve his equipment, or find his fingerprints on the gear. Technically adept broadcasters have used timers to turn the transmitters on and off when the station personnel are at a safe distance, and have wired up motion detectors to turn off the transmitters when people get near them. Transmitting from locations that cannot easily be reached by the DF vehicles (islands, boats, forests, etc.) may also hold some promise. People have experimented with broadcasting from moving vehicles. Transmitting from a location where nobody can approach you without being seen will work, but the broadcaster must constantly keep a lookout. In major US cities where the broadcast bands are very crowded, unlicensed stations have set up informal agreements by which they share the few available channels. One station will operate on a channel on Friday nights, another will take it on Sunday afternoons, and so forth. This strategy has the side-effect of giving a little protection to the stations involved. The authorities would have to keep a DF vehicle in the area for an entire week or two if they wanted to track down all the stations using a frequency. Depending on what else they have on their agenda, they might not be able to invest that much time. * being busted So, what happens if the authorities catch an unlawful broadcaster? Like everything, it varies from country to country. In China, they probably shoot the broadcaster and bill his family for the bullet. In the US, the process normally (but not always) goes like this: The FCC becomes aware of a station. Two or three agents in a DF vehicle track down the station and measure the signal strength near the transmit antenna. Then they knock on the door and ask to inspect the station. If allowed in, they will attempt to get the station operator's identity, they will demand that the station be turned off, and they will ask that the transmitter be surrendered. (Often they will claim that no further action will be taken if the transmitter is handed over, but actually the field agents do not make that decision, and people who have given up their transmitters have sometimes been fined and prosecuted later.) If not allowed entry, the agents will angrily storm off, threatening to come back with a warrant. It might take them several hours or even several weeks to get the warrant, but they will be back. It is very important to the FCC that they get the operator's identity. Their entire legal strategy depends on having a person's name so that they can extract a fine from him and request a permanent injunction against him, and they usually assume that a station is operated by a single person. They will use any means they can to get a name: license plates on vehicles, property ownership records, receipts in the trash can, whatever. A station that is actually being operated by several people can survive a bust simply by moving to another site and being run by the surviving (non-busted) members of the group. When that happens, the FCC has to start its investigation all over again. Unfortunately many stations that claim to be operated by community groups are actually dependant on one pivotal person. If the authorities manage to neutralize that person the station will go silent forever. After "inspecting" a station, the FCC usually mails the operator a Notice of Apparent Liability indicating how large a fine is owed (usually $750 to $11,000). In many cases the FCC will also go to court and get a permanent injunction against the station operator, which can lead to draconian enforcement measures against him if he continues to broadcast. And frequently they come back later with federal marshals or local cops and forcibly confiscate the transmitter and other equipment. --------------------------------- Where can I get more information? --------------------------------- Introductory electronics textbooks are available at most bookstores and libraries. Magazines such as Popular Electronics ( http://www.gernsback.com/pe/pe-index.html ) and Monitoring Times ( http://www.grove.net/ ) sometimes carry relevant articles and interesting advertisements. http://burn.ucsd.edu/~mai/pirate_kiosk.html contains a bit of philosophy and a list of links. The FRN web site (www.frn.net) contains a wealth of articles plus a message board, real-time chat, and several large lists of web links. Andrew Yoder's books and magazine are advertised on the Radio Free Internet pages ( http://www.frn.net/rfi ) An interesting college thesis about unlicensed broadcasting is at http://www.cruzio.com/~rogue/thesis.html It contains a detailed analysis of the FCC's procedures of enforcement and identifies some potential weak links in their legal chain. It also gives great perspective on the 70-year history of the struggle between free radio and the authorities. The following Usenet newsgroups contain useful data once in a while: alt.radio.pirate rec.radio.amateur.antenna rec.radio.broadcasting = end = ------------------------------------------------ [ By Archive-name | By Author | By Category | By Newsgroup ] [ Home | Latest Updates | Archive Stats | Search | Usenet References | Help ] ------------------------------------------------ Send corrections/additions to the FAQ Maintainer: raredata@geocities.com (R. Harrison) Last Update July 20 1999 @ 08:21 AM faq-admin@faqs.org